|
SHOWER BASES
|
Florestone Saflor®
Recess Shower Bases
Architect’s
Specifications
Furnish and install Saflor® Shower Base manufactured by Florestone. (Model Number - see table.) The base shall be furnished with slip-resistant design that does not interfere with the flow of water nor trap it. Base to have integral molded drain (Note: 3634-1 not available with integral drain or as a Corner Model). Base to have not less than 1" flange on remaining sides. Base to be stain, and fungus resistant. Color to be off-white (unless other specified) and will be resistant to fading and abrasion.
Model shall conform to ANSI-Z124.1.2-2005
SAFLOR® Options and Accessories
Biscuit, Bone
Josam Jiffy-Joint™
Wedge-Lok® Seal
Strainer, Brass
Strainer, Chrome
Strainer, Plastic
Repair Kit
|
|
One piece, single threshold model for recessed installation. Features 1" flange on three remaining sides. Integral drain with Wedge-Lok® Seal.
Click for Large View
|
Model
|
A
|
B
|
C
|
D
|
E
|
WT
|
|
3232-1*
|
32" |
32" |
16" |
16" |
16" |
45 |
3434-1
|
34" |
34" |
17" |
17" |
17" |
36 |
3634-1**
|
35" |
33½" |
17½" |
17¾" |
16" |
54 |
5434-1
|
54" |
34" |
27" |
27" |
17" |
80 |
6032-1
|
60" |
32" |
30" |
30" |
16" |
82 |
|
|
*
|
Does not meet I.A.P.M.O. minimum size requirements. Check local codes.
|
**
|
Integral drain not available with this model (3634-1). Supplied with 101 PNC non-caulk drain.
|
Dimensions subject to
change without notice
|
Contact Florestone Products to
verify product specifications.
|
|
Standards:
|
|
I.A.P.M.O. |
International Association of Plumbing and Mechanical Officials File No. 0687.
|
|
ANSI |
American National Standards Institute - Specifications Z-124.2.
|
|
|
CAD Drawings are compressed in zip format (.zip)
|
Model PDF